4.2 E Type engine rebuild
Back to Home| Job
# 2169 (GJ) 4.2 E Type engine rebuild |
Back to Home |
Your cylinder head has now been rebuilt and we have your short block assembly underway.
 |
 |
| Cylinder head has now been fully assembled |
Machined block now ready for assembly |
 |
 |
| Balancing ultra-light billet steel flywheel |
|
 |
 |
| Short block assembly underway |
I am pleased to report that we now have this engine build well underway.
 |
 |
| Another full engine rebuild about to get underway in the CJ engine machine shop |
|
 |
 |
 |
 |
| Oil pan needs several repairs |
Oil filler cap will be replaced |
 |
 |
| This engine is in very poor shape |
Water jacket on intake flange badly corroded |
 |
 |
| Shrapnel damage will require welding and resurfacing |
|
 |
 |
| Damaged gear drive will be replaced |
Machining out old liners on floating boring bar |
 |
 |
| We discovered several cracks between the deck surface and the upper water jacket |
Measuring counter bore for top hat sleeve |
 |
 |
| Repairing damaged water plugs in top of cyl head |
|
 |
 |
| Damaged areas of cylinder head deck required weld repairs |
New top hat liners now installed in block |
 |
 |
| Boring out tappet guides for oversized RBR tappets |
Installing new custom CJ valve seats |
 |
 |
| Torque plate honing the new liners to size |
Machining 5 angled valve job |
 |
 |
| About to surface the block deck surface |
Cylinder head resurfaced after repairs |
 |
 |
| Before and after shots of cosmetic polishing of the front of the head |
|
 |
 |
| Head now ready for assembly |
Going back together on the assembly bench |