Job # 1524 (JH) Team CJ cylinder head rebuild  XK140 C Type - stock specifications

 
I am pleased to report that your cylinder head rebuild has now been completed. Technical specification, as follows:

Combustion chamber size - 98cc
All new intake and exhaust seats installed (0.005" interference fit), multi-cut to 45 degrees
All new silicon bronze guides
All new valves (45 degrees)
Intake - 1.75"
Exhaust - 1.625"
All new cam studs
All new valve springs
Special serrated lock washers
Intake valves have had new seals fitted
Later style keepers, split collets and spring retainers on intake side
Valve lash (0.004" intake, 0.006" exhaust)
Tappets are new throughout
Camshafts - Stock XK140 (OEM)

Valve stem to guide clearance:

Intake: 0.001 to 0.0011
Exhaust: 0.0011 to 0.0012

Spring pressure:

Closed = 90 lbs
Open (0.40 lift) = 145 lbs

Shim allocation as follows:

(Intake) #1 .105" #2 .100" #3 .111" #4 .111" #5 .103" #6 .106"
(Exhaust) #1 .102" #2 .106" #3 .101" #4 .098" #5 .97" #6 .098"

Any questions, please contact me on 1 877 PART JAG or (512) 288 8800.

Email: techsupport@classicjaguar.com
 

The following photos show the water jackets being re-shaped after welding.

I am pleased to report that we now have your cylinder head rebuild well underway. I hope you enjoy watching the rebuild unfold over the next few days!

Any questions, please feel free to contact me at Classic Jaguar on (512) 288 8800 or by email at techsupport@classicjaguar.com
 

 

The XK 140 C Type heads were painted red	Welding up and re-shaping the water jackets